Product classification
On-machine atomization device
hiddenValue
Details Introduction
- Product Description
-
[Product Name] On-machine Nebulizer
[Product Model Specification] LCG01-120cmLCG03-15mL-4FLCG04-22mL-4F
[Main Structure] The pipeline type is composed of a breathing circuit tube; the atomization pipeline type is composed of a breathing circuit tube, a nebulizer cup, a catheter connector, a T-type tee, and an adapter.
[Scope of Application]
1. This product is used in conjunction with anesthesia machines, ventilators, and nebulizers to provide patients with respiratory therapy and atomization inhalation therapy for one-time use. Provided sterile.
2. Intended use environment: ICU ward;
3. Applicable population: patients who need respiratory therapy.
[Product Performance]
1. The leakage rate should not exceed 50mL/min.
2. When the airflow resistance is tested on the pipeline at the nominal rated flow rate of 20L/min, the airflow resistance should not exceed 0.2kPa.
3. The compliance of the breathing circuit under the pressure of (6±0.3) kPa should not exceed 10mL/kPa per meter of the length of the tube.
4. Nebulization volume: Under the working condition of 6L/min airflow, the nebulization volume basically reaches the nebulization volume required for clinical nebulized inhalation drug treatment, which should be ≥0. 25mL/min.
5. The product is sterile, and the residual ethylene oxide should be ≤10μg/g.
[Instructions for use]
1. Open the package, take out the product, check the product connection position, and tighten the loose connection to avoid leakage and looseness.
2. Test the product according to the guidance of the respiratory air supply equipment manufacturer to ensure that the product is compatible with the equipment and that the product has no leakage or blockage.
3. When nebulization treatment is required, connect the catheter connector, nebulizer cup, and breathing circuit tube. Rotate and disassemble the top core in the middle of the nebulizer cup, add the corresponding liquid medicine according to the doctor's advice (the liquid medicine added should not exceed the maximum scale line of the cup body), and then install the top core back; when the top core is installed, the bottom should not hit the small hole in the middle of the nebulizer cup, otherwise it may affect the nebulization effect. Connect one end of the catheter connector to the gas source, turn on the gas source, and start nebulization until the liquid medicine is nebulized. After the nebulization is completed, turn off the gas source, unplug the catheter connector at one end of the gas source, and tidy up the nebulizer device for proper disposal.
[Contraindications] Not suitable for nebulization inhalation treatment of respiratory diseases
[Precautions, warnings and suggestive content]
▼ This product is sterilized and packaged for single use. It is forbidden to use if the packaging is damaged;
▼ When the product is used in conjunction with a respiratory air supply device, ensure that the port of the respiratory air supply device matches the pipeline interface. Before use, the product should be tested according to the instructions of the respiratory air supply device manufacturer.
▼ When nebulizing, follow the doctor's advice to use the recommended nebulizer drugs approved by clinical research.
▼This product should be used or guided by professional medical personnel; when storing or using, it should be kept away from infants and patients with mental illness; do not place or carry it when there is liquid medicine in the medicine cup.
▼Read the instructions carefully before use and ensure that it is used within the validity period.
▼Select the appropriate model and specifications according to the actual situation of the patient.
▼Before use, please confirm that there are no foreign objects blocking the parts.
▼This product cannot be sterilized at high temperature or high pressure.
▼Product treatment after use: harmless treatment according to the treatment method of polymer medical devices.
▼When atomization treatment is required, the recommended air pressure is 60kPa-130kPa and the gas flow rate is 6L/min.
【Storage and transportation conditions】
After packaging, this product should be stored in a dry, well-ventilated, clean room with a temperature of 0-55℃, a relative humidity of no more than 80%, and no corrosive gases. Prevent moisture, heat, direct sunlight and heavy pressure during transportation and storage, and do not freeze.
[Date of production] See product packaging
[Expiration date] Three years from the date of sterilization
[Medical device registration certificate number]
[Product technical requirements number]
[Production license number]
[Registrant, manufacturer and after-sales unit] Guangxi Yihe Bairui Medical Technology Co., Ltd.
[Address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Production address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Contact information] Tel: 0771-6366500
Fax:0771-6366500
Postal code: 530105
[Date of preparation of instructions]
[Explanation of label symbols]
Key words:
Hand Hygiene Disinfection | Skin and Mucous Membrane Disinfection
Product Consulting
Note: Please leave your email and our professionals will contact you as soon as possible!
Address: Building 12, Changgui ASEAN Science Park, 146 Wuhua Avenue, Guangxi ASEAN Technology Development Zone
Nanning Office: 4th Floor, Block C, Yongjia Building, Xinmin Road, Qingxiu District, Nanning City