Product classification
Nasal irrigator
hiddenValue
Details Introduction
- Product Description
-
[Product Name] Nasal Irrigator
[Product Model Specifications] □LCN01-20mL-1 □LCN01-20mL-2
[Scope of Application] Used for nasal cleaning of patients.
[Structure and Composition] It consists of a nasal irrigator and a catheter connector; the product is provided non-sterile when it leaves the factory.
[Product Performance]
1. The flushing rate should be no less than 4mL/min.
2. The connection between the cavity and the catheter should have an axial static tensile force of no less than 15N, which lasts for 30s without breaking or detaching.
[Instructions for Use]
1. Take out the product, connect the nasal irrigator and the catheter, and connect one end of the catheter to the air source.
2. Check whether the product connection is firm and whether there is any leakage.
3. Remove the cover, put the flushing solution in the medicine tank according to the doctor's advice, and then cover the cover.
4. Aim the flushing head at the nostril, turn on the air source, and press the button on the cavity to flush.
5. When cleaning the nostrils, it is best to press the other nostril with your fingers to keep it closed, which will have a better cleaning effect.
6. After the flushing is completed, turn off the air source, unplug the catheter from the air source interface, put disinfectant tablets or medical alcohol in the water to disinfect and soak the accessories, clean them, dry them and reassemble them.
[Contraindications]
1. Patients with severe nasal damage.
2. Patients with allergic reactions to the flushing solution
3. Patients with nasal bleeding are prohibited.
[Precautions, warnings and prompts]
▼This product is a consumable product for a single patient and cannot be extended or expanded.
▼This product is for single use, avoid cross-use.
▼The designated flushing solution should be used according to the doctor's advice. The temperature of the flushing solution should not exceed the human body temperature as much as possible to avoid temperature differences irritating the nasal cavity.
▼This product is not resistant to high temperatures. If it is washed in a dishwasher or sterilized by steaming, high temperature or freezing, it may cause the product to deform and affect its use.
▼After using the product, disassemble the product accessories, clean or soak them with 75% medical alcohol, clean and dry them before assembling them, and they can be reused.
▼Please pay attention to the expiration date on the packaging or product label and use them within the expiration date.
▼How to deal with the product after use: Dispose it as medical device waste.
▼The PVC material (catheter connector) of this product complies with EU environmental protection standards (does not contain phthalates, that is, does not contain 6P), and meets medical grade USP5 (inclusive) or above.
【Storage and transportation conditions】
Prevent moisture, heat and direct sunlight during transportation and storage. After packaging, this product should be stored in a dry, well-ventilated, clean room with a temperature of 0-55℃, a relative humidity of no more than 80%, and no corrosive gases. Prevent moisture, heat and direct sunlight during transportation and storage.
[Production date] See product packaging
[Expiration date] Three years
[Medical device production registration number]
[Medical device product registration number]
[Product technical requirements]
[Registrant/manufacturer] Guangxi Yihe Bairui Medical Technology Co., Ltd.
[After-sales service unit] Guangxi Yihe Bairui Medical Technology Co., Ltd.
[Address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Production address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Contact information] Tel: 0771-6366500
Fax:0771-6366500
Postal code: 530105
[Date of preparation of instructions] July 7, 2020
[Explanation of label symbols]
Key words:
Hand Hygiene Disinfection | Skin and Mucous Membrane Disinfection
Product Consulting
Note: Please leave your email and our professionals will contact you as soon as possible!
Address: Building 12, Changgui ASEAN Science Park, 146 Wuhua Avenue, Guangxi ASEAN Technology Development Zone
Nanning Office: 4th Floor, Block C, Yongjia Building, Xinmin Road, Qingxiu District, Nanning City