Product classification
Disposable gas mask
hiddenValue
Details Introduction
- Product Description
-
[Product Name] Disposable oxygen mask
[Product Specifications] LCO01-C5-2, LCO01-C5-3, LCO01- C5-4, LCO01-A2-2, LCO01-A2-3, LCO01-A2-4, LCO02-C5-2, LCO02-C5-3, LCO02- C5-4, LCO02-A2-2, LCO02-A2-3, LCO02-A2-4, LCO03-C6-2, LCO03-C6-3, LCO03-C6-4, LCO03-A3-2, LCO03-A3-3, LCO03-A3-4
[Scope of Application] Used to deliver oxygen to hypoxic patients, as a channel for oxygen to enter the patient's body.
[Product Performance]
1. The contact area between the oxygen mask and the face should be smooth and flat.
2. The oxygen bag of the oxygen mask should have good sealing performance and should not leak when inflated.
3. The oxygen concentration tolerance of the LCO03 oxygen mask is ±10% of the indicated value of the rotary module, as shown in the following table.Oxygen flow rate corresponding to oxygen concentration of LCO03 oxygen mask
Rotation module
Oxygen concentration
Oxygen flow
green
24%
3L/min
26%
3L/min
28%
6L/min
30%
6L/min
4. The product is sterilized with ethylene oxide and should be sterile. The residual ethylene oxide content of the product should be ≤10μg/g.
[Main structure]
It consists of a mask assembly, a catheter connector, and an elastic band. LCO01 is a common oxygen mask; LCO02 is an oxygen bag oxygen mask, and LCO03 is an oxygen concentration rotary adjustment oxygen mask.
[How to use]
1. When opening the packaging bag, check whether the packaging is damaged or contaminated. If so, do not use it;
2. Buckle the mask on the patient's mouth and nose, fix it with an elastic band, and adjust the aluminum clip to make the edge of the mask close to the nasal cavity and face;
3. Connect the catheter connector to the oxygen connector at the end of the mask;
4. Connect the other end of the catheter connector to the oxygen source equipment and check the connector to prevent it from loosening;
5. Adjust the rotary assembly to the corresponding scale as required to adjust the corresponding oxygen supply concentration (only applicable to LCO03 type);
6. Turn on the oxygen supply equipment and adjust the oxygen flow rate.
[Contraindications, precautions, warnings and tips]
1. This product is for one-time use and is sterile packaged. Do not use if the package is damaged.
2. Choose the appropriate specifications according to the patient's age, gender and body shape.
3. This product is for single patient use only and the sterilization validity period is three years.
4. This product should be purchased and used by medical personnel or under the guidance of medical personnel.
5. Read the instructions carefully before use and ensure that it is used within the validity period.
6. This product cannot be sterilized at high temperature or high pressure.
7. How to deal with the product after use: Dispose of it as medical device waste.
8. Use with caution if you are allergic to PVC material.
[Storage and transportation conditions] After packaging, this product should be stored in a dry, well-ventilated and clean room with a temperature of 0-55℃, a relative humidity of no more than 80%, and no corrosive gases. Prevent moisture, heat, direct sunlight and heavy pressure during transportation and storage, and do not freeze.
[Date of production] See product packaging
[Expiration date] Three years from the date of sterilization
[Medical device registration certificate number]
[Product technical requirements number]
[Production license number]
[Registrant, manufacturer and after-sales unit] Guangxi Yihe Bairui Medical Technology Co., Ltd.
[Address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Production address] Factory 2, No. 42, Anping Road, Guangxi-ASEAN Economic and Technological Development Zone
[Contact information] Tel: 0771-6366500
Zip code: 530105
[Date of preparation of instructions]
[Explanation of label symbols]
Key words:
Hand Hygiene Disinfection | Skin and Mucous Membrane Disinfection
Product Consulting
Note: Please leave your email and our professionals will contact you as soon as possible!
Address: Building 12, Changgui ASEAN Science Park, 146 Wuhua Avenue, Guangxi ASEAN Technology Development Zone
Nanning Office: 4th Floor, Block C, Yongjia Building, Xinmin Road, Qingxiu District, Nanning City