Medical Device Cleaning
Cleaning is the physical removal of contaminants from the product during the last clinical use by wiping, soaking, brushing and rinsing in preparation for further killing or cleaning. Guangxi Medical Devices
The cleaning of medical devices shall be carried out in accordance with the product instructions or instructions. Choose the cleaning temperature and concentration according to the instructions for use of the medical cleaning agent, which should be prepared and used immediately. The removable parts of the instrument shall be disassembled and cleaned in small units in accordance with the production instructions. To assemble the equipment, you must first clean the wearing parts and valuable parts, and then retract the stoma. You can use a convex chassis, or you can use a stoma belt or a stoma abdominal belt. Select the cleaning method according to the instrument type.
regular equipment and moisture-proof and heat-resistant equipment should be given priority to mechanical cleaning; for precision and complex equipment and equipment with special requirements, manual cleaning should be given priority; for equipment with large pollution and complex structure, manual and mechanical cleaning should be adopted. A combination of methods. Precision instruments and sharp instruments should be stored in a special cleaning basket for cleaning and protected after cleaning. When the cleaning tool is contaminated, it should be cleaned immediately, and cleaned or replaced in time after use. Rules must be observed when monitoring the quality of cleaning. Correct cleaning methods, standardized cleaning procedures, and rational use of cleaning equipment can not only ensure the cleanliness of the equipment, but also provide protection for the equipment after disinfection.
Proper cleaning procedures can reduce the degree of corrosion of the equipment. The general principle of cleaning agent selection is to select pollutants according to the composition and remove pollutants in a targeted manner. For example, metal contaminated equipment can choose weak alkaline cleaning agent; inorganic contaminated equipment can consider the use of acidic cleaning agent; rough surface, complex structure of the equipment needs rich in enzyme cleaning agent. At present, there are many kinds of cleaning agents used in our country, which need to be selected according to the actual situation. Guangxi Medical Equipment Company
The above content is collected and sorted by the Internet, and the copyright belongs to the original creator. If there is any infringement, please contact us to handle the deleted content, thank you!
Previous Page
More news
Address: Building 12, Changgui ASEAN Science Park, 146 Wuhua Avenue, Guangxi ASEAN Technology Development Zone
Nanning Office: 4th Floor, Block C, Yongjia Building, Xinmin Road, Qingxiu District, Nanning City